• Storage conditions of pvc composite pipes and precautions during construction

    Due to the wide application of PVC composite pipes, many businesses store a large amount of inventory. Poor storage methods will affect the quality of the pipes. Therefore, we must minimize the storage time and maintain the storage temperature at 10 ...

  • What is ball valve

    The ball valve opening and closing part (ball) is driven by the valve stem and rotates around the ball valve axis. It can also be used for fluid adjustment and control. The hard-sealed V-shaped ball valve has a strong shear force between the V-shaped...

  • CPVC pipe connection method and construction process

    In the selection of water and electricity pipelines, CPVC pipes are one of the most widely used pipes. Its temperature resistance and corrosion resistance are very welcome. This article will tell you about the three connection methods of CPVC pipes a...

  • Operation requirements for PVC pipes in summer and winter

    Summer PVC pipe decoration conditions Due to extreme weather phenomena such as too high temperature, too dry or too much rain and too humid often occur in summer, it has never been considered a good season for home improvement. In fact, as long as yo...

  • Common faults and troubleshooting methods of PVC pipeline construction and installation

    As a commonly used pipe in our lives, PVC pipes are also particular about their construction process. It is not just a simple installation. There are some precautions if you do not pay special attention during the construction process, which may caus...

  • The influence of external temperature changes on PVC pipes

    The most common water supply and drainage pipe for industrial PVC pipes is made of polyvinyl chloride materials. It is widely used in the pipeline industry. It has the advantages of high strength, good electrical insulation, and light weight. It is a...

  • The plastic diaphragm valve uses the movement of the diaphragm to adjust

    Due to the advantages of light weight, corrosion resistance, non-adsorption of scale, integrated connection with plastic pipes and long service life of plastic valves, plastic valves are used in water supply (especially hot water and heating) and oth...

  • The advantages of PVC plastic valve pipe and the installation and maintenance of PVC plastic breathing valve

    PVC valves are the third type of plastic valves used in production after polyethylene and polypropylene. Compared with the traditional materials of copper or ductile iron, the installation cost is relatively low. By adding plasticizers, they can be m...